Quote the removal and the stump grind as separate lines, and give the grind its own price marked as optional. The customer can then say yes to the tree without the stump, and when they line your quote up against two others, they can see exactly what yours includes. A single figure for "remove tree" hides the work, and it loses to a cheaper quote that quietly leaves the stump behind.
Lines that belong on the quote
Take a typical job: a mature sycamore in a back garden, too close to the house to fell in one piece, with the only access down a side path. That quote has five distinct pieces of work, plus VAT, and each one should be a line.
| Line | What it covers | Optional? |
|---|---|---|
| Dismantle and fell | Sectional removal, rigging and lowering, and the climber's time | No |
| Access and equipment | A crane over the house, or a narrow tracked platform if one fits the side path, plus ground protection boards and a chipper on the drive | No |
| Traffic management | Signs, cones or a road closure if you are working from or over the road | Only if needed |
| Waste | Chip and take away, or leave logs stacked on site | Customer's choice |
| Stump grind | Grind to a stated depth, with the grindings either removed or left in the hole | Yes |
| VAT | If you are registered | No |
Describe each line in words a homeowner understands. "Sectional dismantle, lowered on ropes to protect the conservatory" tells them why the job costs more than felling a tree in a field.
Write down what is not included
Most disputes on tree jobs start with something the customer assumed was included. Put a short "Not included" list at the bottom of every quote:
- Roots outside the grinding area, and any below the stated grinding depth
- Topsoil, turf or reinstatement after the grind
- Damage to buried pipes or cables that were not pointed out before work started
- Permissions such as consent for a protected tree, unless a line says you will handle them
Check the tree is not protected
Before you price the job, find out whether the tree has a Tree Preservation Order or stands in a conservation area. The local planning authority can tell you, and many councils have a map online. The rules below are England's; Scotland, Wales and Northern Ireland have their own, so check with the council wherever you work.
In England, according to GOV.UK's guidance on protected trees, checked on 13 and 16 November 2026:
- Anyone who wants to cut down, top, lop or uproot a tree covered by an Order, or wilfully damage or destroy it, must first apply to the local planning authority for consent, unless an exception applies. The guidance adds that, in the Secretary of State's view, cutting roots also needs consent, which matters if you are grinding a stump.
- The authority has eight weeks from receiving an application to decide it. After that, the applicant can appeal on the grounds that no decision was made.
- For trees in a conservation area, the authority must be given six weeks' notice before most work, known as a section 211 notice.
- There are size exceptions for conservation areas. Work on a tree with a diameter of 75 millimetres or less, measured over the bark at 1.5 metres above the ground, does not need notice.
- Cutting down a protected tree without consent can lead to a fine of up to £20,000 in the magistrates' court, and an unlimited fine if the case goes to the Crown Court.
Either way, plan on the job not starting for six to eight weeks. Conservation area notice takes six weeks unless the council replies sooner. For a tree under an Order, the council should decide within eight weeks, but it can take longer, and consent can be refused. Add a line to the quote saying who will apply or give notice, and that the start date follows once permission is in place. The council decides on any particular tree, and if a job turns on the detail, take advice.
Pricing the stump grind
Price the grind on the stump, not on the tree. The things that change the time it takes are:
- Diameter. Measure across the stump at ground level, and allow for buttress roots flaring out from it.
- Access. Measure the gate or path before you quote. A grinder that will not fit means a smaller machine, or carrying the work out by hand.
- Depth. State it on the quote. "Ground to a nominal depth below ground level" means nothing to a customer; "ground to 300mm below ground level" does.
- Grindings. Removing them is a load to tip, so price it as a choice: removed, or left in the hole to settle.
If there are several stumps on one job, a half day or day rate for the grinder is usually clearer than a price per stump.
Make the option easy to accept
Show two totals at the bottom: one for the removal alone, and one with the stump grind. The customer should not have to add lines up to see what the choice costs them.
Then make acceptance just as simple. On a paper or PDF quote, put a box to tick for each option and ask them to sign or reply by email saying which one they want. Some job management software lets you mark lines as optional and lets the customer accept the quote online, which saves a phone call; not every tool does both, so check yours. Either way, keep the accepted version, because it is the record of what you agreed to do.
Do this before your next tree quote goes out
- Split the job into the lines in the table above, and describe each one in plain words.
- Put the stump grind on as its own optional line, with depth and grindings stated.
- Add a "Not included" list.
- Check for a Tree Preservation Order or conservation area, and say on the quote who handles consent or notice.
- Show a total with and without the grind, and keep the version the customer accepts.
If you take deposits on bigger jobs, the guide to deposits and payment schedules covers how to set them out.